Sennheiser 100 G3 Overview of the displays of the EM 100 receiver, MHz, EW100 G3, MUTE

Product overview

Overview of the displays of the EM 100 receiver

After switch-on, the receiver displays the standard display “Receiver Parameters”. For further illustrations and examples of the different standard displays, please refer to 24. This standard display displays the operating states of the receiver.

￿ ￿ ￿ ￿ ￿

		PEAK0		1. 1	EW100 G3
40
10		-20		543.200		MHz
25		-10
			-30		MUTE
				P
	RF		AF

		￿			￿	￿	￿
Display	Meaning
￿ RF level “RF”				Diversity display:
(Radio Frequency)					Antenna input I is active
			40		Antenna input II is active
		30
				RF signal level:
		20
		10		Field strength of the transmitted signal
				Squelch threshold level
			RF
￿ Audio level “AF”		PEAK		Modulation of the transmitter
(Audio Frequency)				with peak hold function.
	0
	-10			When the level display for audio level shows full
		-20		deflection, the audio input level is excessively
		-30		high. When the transmitter is overmodulated
	-40			frequently or for extended periods of time, the
		AF		“PEAK” display is shown inverted.
￿ Frequency bank and	Current frequency bank and channel number
channel
￿ Frequency	Current receiving frequency
￿ Name	Freely selectable name of the receiver

￿Pilot tone “P”Activated pilot tone evaluation

￿Muting function “MUTE” Receiver is muted

	Receiver does not output an audio signal
	(see also page 28).
￿ Battery status of the	Charge status:
transmitter	approx. 100%
	approx. 70%
	approx. 30%
	Icon is flashing; charge status is critical
￿ Lock mode icon	Lock mode is activated

6