Cleaning and maintaining the conference system
Cleaning and maintaining the conference system
CAUTION
Liquids can damage the product!
Liquids entering the product can cause a
Solvents or cleansing agents can damage the surfaces of the product.
Keep all liquids away from the product.
Do not use any solvents or cleansing agents.
Switch the conference system off (see page 14).
Before cleaning, disconnect the ADN CU1 central unit and the ADN PS power supplies from the mains power supply.
Only use a dry and soft cloth to clean the product.
To ensure optimum cooling of the ADN CU1 central unit and the ADN PS power supplies:
Clean the air vents on the front, back and bottom from time to time with a soft brush or paintbrush in order to avoid dust deposits.
ADN CU1 | ADN PS |
ADN PS 15