Structuring and controlling the conference system
Large conference system with redundant ring topology
The redundant ring topology ensures that, should one conference unit or system cable fail or be manipulated, all other conference units of the cable ring will continue to function reliably.
For setting up a large conference system with redundant ring topology, you require one ADN CU1 central unit for controlling the conference and additional ADN PS power supplies for powering the conference units. The conference units are interconnected in rings and two rings can be connected to each ADN PS power supply.
ADN CU1
PORT I/II
ADN PS (max. 15)
PORT | I | 1 |
| ||
|
|
2 I PORT
PORT | II |
PORT | |
II | 2 |
1 |
|
max. 40
ADN D1/ADN C1
ADN CU1 | ADN PS |
max. 80 m | max. 80 m |
52.8 V
1 | 2 | 3 | ... 20 | |
| approx. | approx. |
| |
|
|
|
|
|
>35 V
Calculating the voltage supply of the conference units
The “ADN Cable Calculator” software allows you to calculate the voltage supply on the individual sections of a cable string or cable ring and to plan the structure of the conference system. The software is available from your Sennheiser partner or from the “Product Downloads” area on the product page at www.sennheiser.com.
For further information on the installation and use of the “ADN Cable Calculator” software, refer to the help section of the “ADN Cable Calculator” software and to the detailed instruction manual “ADN Conference System”.
ADN PS 7