Putting the receiver into operation
Connect the antennas. You have the following options:
–You can connect the supplied rod antennas to the rear of the receiver (see page 13). In this case, insert the two blanking plugs 
into the holes of the blanking plate.
–You can use the AM 2 antenna front mount kit (see “Accessories and spare parts” on page 49) and mount the rod antennas to the blanking plate 
.
Rack mounting two receivers
When using more than one receiver, we recommend connecting remote antennas and, if necessary, using Sennheiser antenna accessories. Fore more information, visit the ew G3 product page at www.sennheiser.com.
To mount the receiver into a 19” rack:
Slide the receiver with the mounted blanking plate 
into the 19” rack.
Secure the rack mount “ears” to the 19” rack.
If you are using the supplied rod antennas:
Align the antennas in a
When rack mounting two receivers side by side, you can only front mount the antennas when using the ASA 1 antenna splitter in conjunction with the AM 2 antenna front mount kit and an additional GA 3 rack adapter (see “Accessories and spare parts” on page 49).
We recommend using remote antennas.
15