Using the receiver

To switch the receiver to standby mode:

￿Keep the STANDBY button  pressed until “OFF” appears on the display panel.

The receiver switches to standby mode.

When in the operating menu, pressing the STANDBY button  will cancel your entry (ESC function) and return you to the current standard display.

To completely switch the receiver off:

￿Disconnect the receiver from the mains by unplugging the mains unit from the wall socket.

Synchronizing a transmitter with the receiver

You can synchronize a suitable transmitter of the ew 100 G3 series with the receiver. During synchronization, the following parameters are transferred to the transmitter:

Setting

Transferred parameters

 

 

“Frequency Preset” Currently set frequency

“Name”Freely selectable name currently set on the receiver

“Pilot Tone” Current pilot tone setting of the receiver (“Inactive”/“Active”)

It is vital to observe the notes on frequency selection on page 42.

20