Sennheiser EM 100 manual 32

Adjustment tips and functions

				PEAK		Soundcheck				PEAK	20.12 ew100 G3
		40		0			40			0
	10			-20		533.875 MHz	10			-20	533.875	MHz
			25	-10					25	-10
				-30						-30
					P						P
			RF	AF					RF	AF
“Soundcheck”								Select any other
standard display								standard display

￿Position the transmitter in the area in which it is to be used and switch it on.

￿Leave the transmitter switched on and go to your receiver.

￿On the receiver, change to the “Soundcheck” standard display.

	PEAK	20.12	ew100 G3						PEAK		Soundcheck
40	0						40		0
10	-20	533.875		MHz		10			-20		533.875 MHz
25	-10							25	-10
	-30								-30
RF	AF	P	MUTE					RF	AF	P	MUTE
“Receiver Parameters”					“Soundcheck”
standard display					standard display

If no transmitter is being received or if the signal is below the squelch threshold level, “MUTE” appears on the display panel (see “If a problem occurs ...” on page 47).

￿Go to your transmitter.

￿With the transmitter, walk up and down the area in which it is to be used.

￿Then leave the transmitter there and do not switch it off.

During the soundcheck, the receiver records the RF level and the AF level. The recording result is displayed on the “Soundcheck” standard display:

RF Max						AF Max
			PEAK			Soundcheck
	40		0
			-10			533.875 MHz
		25
		10		-20
				-30	P
		RF		AF

RF Min

31