Sennheiser EM 100 Putting the receiver into operation, Preparing the receiver for use

Putting the receiver into operation

Putting the receiver into operation

Preparing the receiver for use

Recommendations for optimum reception

To ensure optimum reception even under difficult conditions, we recommend connecting remote antennas and, if necessary, using antenna splitters (see “Accessories and spare parts” on page 49).

When rack-mounting the receiver, you can mount the supplied antennas to the front of the rack by using an antenna front mount kit. When mounting more than one receiver into a rack, you should use remote antennas.

	If you want to mount the receiver into a 19” rack:
	￿ Read the corresponding chapter on page 13.
	If you want to set up the receiver on a flat surface:
	￿ Read the next chapter.
	Setting up the receiver on a flat surface
CAUTION!	Risk of staining of furniture surfaces!

Some furniture surfaces have been treated with varnish, polish or synthetics which might cause stains when they come into contact with other synthetics. Despite a thorough testing of the synthetics used by us, we cannot rule out the possibility of staining.

￿Do not place the receiver on delicate surfaces.

Fastening the stacking elements

The stacking elements are designed to help protect the operating elements from damage or deformation, e.g. if the receiver is dropped. Therefore, fasten the stacking elements, even if you do not want to stack your receivers.

11