Sennheiser EM 100 The extended menu “Advanced Menu”

Adjustment tips and functions

Menu

The extended menu “Advanced Menu”

Squelch

Easy Setup Setup

Frequency Preset

Name

AF Out

Equalizer

Auto Lock

Advanced

Exit

Advanced Menu

Tune

Guitar TunerSetup

Pilot Tone

LCD Contrast

Reset

Software Revision

Exit

Setting a receiving frequency for the current channel

To get into the extended menu “Advanced Menu”:

￿From the main menu, select “Advanced”.

Setting receiving frequencies for the frequency bank “U”

When you have selected one of the system banks and then select the “Tune” menu, the receiver automatically switches to channel 1 of the frequency bank “U”. In this case, “U.1” briefly appears on the display panel.

Upon delivery, the channels of the frequency bank “U” are not assigned a receiving frequency.

Via the “Tune” menu item, you can set a receiving frequency to be stored in the current channel or you can select a different channel in the frequency bank “U” and assign this channel a receiving frequency.

It is vital to observe the notes on frequency selection on page 42.

￿ Press the UP/DOWN button until the “Tune” menu item appears.

		SET		￿ Press the SET button.
				The frequency selection appears.
				Advanced Menu	SET			Tune			SET				Tune
			PEAK0				PEAK0							PEAK0
					40						40
40
	25		-10	Tune		25	-10		531	.375 MHz			25	-10	534.	208	MHz
	10		-20			10	-20						10	-20
			-30	531.375 MHz			-30		B.Ch: U. 1					-30	B.Ch: U. 1
	RF		AF			RF	AF						RF	AF
Call up “Tune”						Select the MHz value						Select the kHz value;
						and confirm						store the setting

SET

“Stored”

￿Set the desired frequency.

SET ￿ Press the SET button.

Your settings are stored.

You are back to the operating menu.

38