If a problem occurs ...
Problem | Possible cause | Possible solution | |
No access to a | During scanning, an RF signal | Set the transmitter operating on this | |
certain channel | has been detected on this | channel to a different channel and | |
| channel and the channel has | redo the frequency preset scan | |
| been locked | (see page 34). | |
| During scanning, a transmitter | Switch the transmitter off and | |
| of your system operating on this | redo the frequency preset scan | |
| channel has not been switched | (see page 34). | |
| off |
| |
|
|
| |
During the sound- | One of the antennas is not | Check the antenna cable or the | |
check, only one | correctly connected | antenna. | |
diversity display | Antennas are not optimally | Reposition the antennas. | |
(I or II) appears on | |||
positioned |
| ||
the display panel |
| ||
|
| ||
None of the diver- | Receiver’s squelch threshold is | Reduce the squelch threshold | |
sity displays I or II | adjusted too high | (see page 33). | |
appears on the | Transmitter’s RF signal is too | Reduce the distance between | |
display panel | |||
weak | transmitter and receiver. | ||
| |||
|
|
|
If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions, please contact your local Sennheiser partner for assistance.
To find a Sennheiser partner in your country, search at www.sennheiser.com under “Service & Support”.
48