Sennheiser EM 100 manual 40

Adjustment tips and functions

Selecting a channel and assigning this channel a receiving frequency

￿ Press the UP/DOWN button until the “Tune” menu item appears.

SET ￿ Keep the SET button pressed until the channel selection appears.

			Advanced Menu	SET			Tune		SET			Tune
		PEAK0				PEAK0			40		PEAK0
40					40
	25	-10	Tune		25	-10	544.200 MHz			25	-10		544	.200 MHz
		-20				-20					-20
	10	-30			10	-30	B.Ch: U.	1		10	-30		B.Ch: U. 1
	RF	AF	544.200 MHz		RF	AF				RF	AF

Call up “Tune”	Select the channel	Set the frequency;
(special function)		store the setting
			SET

“Stored”

Advanced Menu

Tune

Guitar Tuner

Pilot Tone

LCD Contrast

Reset

Software Revision

Exit

￿Set the desired channel.

SET ￿ Press the SET button.

The frequency selection appears.

￿Set the desired frequency.

SET ￿ Press the SET button.

Your settings are stored. You are back to the operating menu.

Changing the settings of the guitar tuner

The following settings are available:

Setting Meaning

“Inactive“ The “Guitar Tuner” standard display is deactivated (see page 24).

“Active“ When selecting the “Guitar Tuner” standard display (see page 24), the receiver is not muted.

“Audio Mute“ When selecting the “Guitar Tuner” standard display

(see page 24), the receiver is muted.

39