Using the receiver

To transfer the parameters:

￿Switch the transmitter and the receiver on.

 

 

￿Press the button  on the receiver.

“Sync” appears on the display panel of the receiver.

￿Place the infra-red interface of the transmitter (see the instruction manual of the transmitter) in front of the infra-red interface  of the receiver.

The parameters are transferred to the transmitter. When the transfer is completed, “” appears on the receiver’s display panel. The receiver then switches back to the current standard display.

To cancel the transfer:

￿Press the STANDBY button  on the receiver.

“” appears on the display panel of the receiver. “” also appears if no suitable transmitter was found.

21