Putting the receiver into operation

Mounting the antennas to the front of the rack

To mount the antenna connections to the front of the rack when rack mounting the receiver, you require the GA 3030 AM antenna front mount kit (optional accessory). The GA 3030 AM consists of:

!• 2 BNC extension cables (screw-in BNC socket ! to BNC connector ),

• 2 antenna holders ,

• 4 screws,

• 2 washers ,

• 2 nuts .

1

￿

1

!

￿

!

￿Guide the two BNC connectors

￿Connect the two BNC connectors

through the holes in the rack mount “ears” ￿. to the two BNC sockets ￿ and ￿.

￿

!

￿Screw the antenna holders to the BNC sockets ! using the supplied washers and

nuts .

!

￿Secure the antenna holders to the rack mount “ears” ￿ of the receiver using two of

the supplied screws respectively. ￿ Slide the receiver into the 19” rack.

"

11