If a problem occurs ...

Problem

Possible cause

Possible solution

None of the diversity

Receiver’s squelch threshold is adjusted too

Reduce the squelch threshold (see page 17).

displays I or II appears on

high

 

the display panel

Transmitter’s RF signal is too weak

Increase the transmission power of the

 

 

 

transmitter.

 

 

Reduce the distance between transmitter

 

 

and receiving antennas.

 

 

 

During the soundcheck,

One of the antennas is not correctly

Check the antenna cables or the antennas.

only one diversity display

connected

 

(I or II) appears on the

Antennas are not optimally positioned

Reposition the antennas.

display panel

 

 

 

 

 

If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions, please contact your local Sennheiser partner for assistance.

To find a Sennheiser partner in your country, search at www.sennheiser.com under “Service & Support”.

36