On the receiver, change to the “Guitar Tuner” standard display (see page 16).
Activate the “Guitar Tuner” standard display via the operating menu (see page 27).

Adjustment tips and functions

Adjustment tips and functions

The operating menu allows you to make settings for your receiver and your transmitters. The “Guitar Tuner” and “Soundcheck” standard displays provide additional functions and can be called up by turning the jog dial, without having to get into the operating menu.

Standard displays with additional functions

Tuning a guitar (for SK transmitters only)

￿

￿Connect a guitar to your SK transmitter.

40

PEAK

B.CH: 20.64

**2000**

40

PEAK0

543.200 MHz

0

 

 

 

 

 

 

-10

 

 

 

30

-10

543.200

MHz

30

 

 

 

20

-20

 

 

 

30

-20

 

 

 

 

 

 

 

 

 

30

 

 

 

 

205

 

 

 

 

 

 

25

-30

 

 

 

20

-30

EQ:

 

SKM2000

20

 

 

 

10

 

10

-40

 

 

 

 

-40

P + 12dB MUTE

 

 

 

-40

 

 

 

RF

AF

 

 

RF

AF

 

**2000**

MUTE

440 Hz

“Receiver Parameters”

“Guitar Tuner”

standard display

standard display

￿Tune your guitar.

The receiver automatically recognizes the pitch of the plucked string.

Doing a soundcheck

By doing a soundcheck, you can check the reception area for field strength gaps (“dropouts”) which cannot be compensated for by the receiver’s diversity circuitry.

The “Soundcheck” standard display must not be activated until later because otherwise the recording will give wrong results.

￿If necessary, change from the “Soundcheck” standard display to one of the other standard displays of your receiver.

￿Position the transmitter in the area in which it is to be used and switch it on.

￿Leave the transmitter switched on and go to your receiver.

￿On the receiver, change to the “Soundcheck” standard display.

 

PEAK

B.CH: 20.64

**2000**

 

 

 

 

 

 

PEAK

 

Soundcheck

40

0

543.200MHz

40

 

 

0

 

30

-20

30

 

-20

 

20.64 **2000**

 

-10

 

 

 

 

 

 

 

 

-10

 

 

 

 

 

 

20

-40

EQ:

SKM2000

 

20

 

-40

 

543.200MHz

 

 

10

10

 

 

 

-30

 

 

 

 

 

 

 

 

-30

 

P MUTE

 

 

 

 

 

 

P + 12dB MUTE

 

 

 

 

 

 

AF

 

 

 

 

 

RF

AF

 

 

 

RF

 

 

 

 

 

 

Receiver Parameters

 

 

Soundcheck

If no transmitter is being received or if the signal is below the squelch threshold level, “MUTE” appears on the display panel (see “If a problem occurs ...” on page 35).

￿Go to your transmitter.

￿With the transmitter, walk up and down the area in which it is to be used.

￿Then leave the transmitter there and do not switch it off.

21