|
| Using the operating menu | ||
|
|
|
|
|
|
|
|
| |
Display | Function of the menu item |
| Page |
|
“SK Settings” / “SKM Settings” / “SKP Settings” |
|
|
| |
|
|
|
|
|
Sensitivity | Adjusts the input sensitivity |
|
|
|
Low Cut | Actives/deactivates the low cut filter (“SKM Settings” only) |
|
|
|
Auto Lock | Activates/deactivates the automatic lock mode |
|
|
|
Mute Mode | Sets the mode for the MUTE switch (“SK Settings” and “SKP Settings” only) |
| ||
RF Power | Adjusts the transmission power |
|
| |
|
|
| ||
PhantomPower48V | Activates/deactivates the phantom powering (“SKP Settings” only) |
|
|
|
Cable Emulation | Emulates guitar cable capacities (“SK Settings” only) |
|
|
|
Exit | Exits the menu item and returns to the “Sync Settings” submenu |
|
|
|
|
|
|
|
|
“Warnings”
Activates/deactivates warnings (color change and warning messages):
Audio overmodulation |
| |
Low RF Signal | RF signal is weak |
|
RF Mute | RF signal is too weak or no RF signal |
|
TX Mute | • Transmitter is muted or | |
| • no pilot tone | |
|
| |
RX Mute | Receiver is muted |
|
Low Battery | Charge status of the transmitter battery/the BA 2015 accupack is critical |
|
Exit | Exits “Warnings” and returns to the extended menu “Advanced Menu” |
|
|
|
|
Menu
Squelch
Easy Setup
Frequency Preset
Name
AF Out
Equalizer
Auto Lock
Advanced
Exit
Working with the operating menu
If the lock mode is activated, you have to deactivate it In order to be able to work with the operating menu (see page 15).
By way of example of the “Frequency Preset” menu, this section describes how to use the operating menu.
Changing from a standard display to the operating menu
Press the jog dial.
The current standard display is replaced by the main menu. The last selected menu item is displayed.
Selecting a menu item
Turn the jog dial to change to the “Frequency Preset” menu item. The current setting of the selected menu item is displayed:
PEAK Menu
40 0
30
20
10 |
| Name | ||
|
|
| B.Ch: 1. 1 | |
RF |
| AF |
| |
|
|
| ||
|
|
|
|
|
19