Sennheiser EM 550 G2 manual Daisy-chaining up to eight twin receivers, Connecting the mains cable

EM_550_G2.book Seite 47 Donnerstag, 27. November 2003 1:33 13

Essential notes on mounting remote antennas:

yPosition antennas in the same room in which the transmission takes place!

yMaintain a minimum distance of 50 cm from metal objects (including reinforced-concrete walls)!

yMaintain a minimum distance of 1 m between receiving antennas!

Daisy-chaining up to eight twin receivers

The twin receivers feature an integrated antenna splitter so that up to eight twin receivers can be daisy-chained without any additional antenna splitters being required. Only daisy-chain receivers which operate in the same frequency range (see “The channel bank system” on page 40).

Connect the two supplied telescopic antennas or two remote antennas (optional accessories) to the BNC sockets and at the rear of the first twin receiver.

Use BNC cables to daisy-chain the twin receivers as shown in the diagram on the left.

Note:

To supply an active directional antenna, a direct voltage (which cannot be switched off) is output via the BNC sockets and of the twin receivers. For optimum reception quality, we recommend limiting the number of daisy-chained twin receivers to 8.

Connecting the mains cable

Use the mains cable to connect the twin receiver to the mains

(90–264 V AC, 50–60 Hz).

Pass the mains cable through the cable grip .

Plug the mains cable into socket .

47