![](/images/new-backgrounds/1316666/31666631x1.webp)
EM_550_G2.book Seite 52 Donnerstag, 27. November 2003 1:33 13
Working with the operating menu
By way of example of the “Tune” menu, this section describes how to use the operating menu. The operating steps for adjusting the settings via the menu are similar for both receivers of the EM 550 G2.
After switching the receiver RX A or RX B on, the standard display is shown on the display panel.
Getting into the operating menu
Press the SET button to get from the standard display into the operating menu. The last selected menu and its current setting are displayed with a background.
Selecting a menu
Press the / rocker button to select a menu.
Press the SET button to get into the setting mode of the selected menu.
The name of the menu and its current setting are displayed.
Adjusting a setting
Press the / rocker button to adjust the setting. The new setting becomes effective immediately.
By briefly pressing the / rocker button, the display jumps either forwards or backwards to the next setting. In the “Channel”, “Tune” and “Name” menu, the / rocker button features a “fast search” function. If you hold down a button, the display cycles continuously, allowing you to get fast and easily to your desired setting.
Storing a setting
Press the SET button to store the setting. “Stored” appears on the display, indicating that the setting has been stored. The display then returns to the top menu level.
Exiting the operating menu
Select the “Exit” menu to exit the operating menu and to return to the standard display.
When in the operating menu, briefly pressing the ON button will cancel your entry (ESC function) and return you to the standard display with the last stored settings.
52