Sennheiser RS 220 Connecting the transmitter to audio sources, Connection possibilities output of

Putting the RS 220 into operation

Connecting the transmitter to audio sources

You can connect up to 3 audio sources (e.g. CD player, DVD player and TV) to the transmitter. The transmitter is fitted with 2 digital and 1 analog inputs and outputs. If you connect several audio sources, you can conve- niently toggle between these audio sources with a key press (see page 21).

￿ Switch your audio source off before connecting the transmitter.

￿Check the available connection possibilities of your audio source.

￿Select the corresponding connection cable and, if necessary, a suitable adapter.

Connection possibilities (output) of
the audio source				Connection cable/adapter
A	RCA (analog)	L	R	Stereo audio cable with dual
				RCA plugs on each end
B	SCART (analog)			Stereo audio cable with audio
				adapter (to be ordered sepa-
				rately)
C	Headphone socket			Stereo audio cable with audio
	(analog)			adapter
D	Coaxial (digital)			Coaxial cable with with a single
				RCA plug on each end
E	Optical (digital)			Optical digital cable (to be
				ordered separately)

￿Follow the instructions in the corresponding chapter in order to connect your transmitter to the audio source.

AConnecting the transmitter to RCA sockets

￿

	IN		OUT
	R						COAXIAL
9V/1A
	L			IN		OUT		Pairing
							OPTICAL
								-LEVEL
DC IN		ANALOG			DIGITAL

OUT

RL

K

￿Connect the RCA plugs of the stereo audio cable K to the corre- sponding RCA sockets of your audio source.

￿Connect the RCA plugs of the stereo audio cable K to the left (“L”) and right (“R”) ANALOG IN input ￿.

10 RS 220