Using the RS 220
Associating a second pair of headphones to the transmitter
The headphones and the transmitter are already associated upon delivery. If you want to use a second pair of headphones, you have to associate it to the transmitter.
When associating the headphones to the transmitter, the distance between the transmitter and the headphones should not exceed 1 m.
Press the On/Off button 8 on both pairs of headphones to switch the
headphones on.
The headphones search for a suitable transmitter. The Power LED 9 of the already associated headphones lights up while the Power LED 9 of the new headphones flashes.
Press and hold the On/Off button 8 on the new pair of headphones until the Power LED 9 alternately flashes blue/red.
Switch the transmitter on (see page 16).
Press the Pairing button 9 on the transmitter.
The ON LED G of the transmitter flashes green/red. After approx.
2seconds, the headphones are paired with the transmitter and you can hear your audio source. The Power LED 9 of the headphones lights up blue, the ON LED G of the transmitter lights up green.
ON
9
8
I
IN | OUT |
|
|
| |
5V/1A R |
|
|
|
| COAXIAL |
| IN |
| OUT | Pairing | |
L |
|
|
|
| OPTICAL |
|
|
|
| ||
|
|
|
|
|
|
DC IN |
| ANALOG |
|
|
| DIGITAL |
|
The volume and the balance of the each pair of headphones can be adjusted individually.
