Philips 5.1 manual HI-SR96KHz, Listen To Analog Inputs, Front Speakers or Headphones

Philips Sound Solutions

HI-SR(96KHz)

Selecting the HI-SR (High Sample Rate) button will enable 96KHz sample rate for both input and output from the Ultimate Edge. When you enable HI-SR on the Ultimate Edge:

-Input streams are sampled at 96kHz and processed by PSA2 HD at that rate. PSA2 HD output may then be converted to a lower rate if required by the recording program.

-Output streams lower than 96kHz will be converted to 96kHz.

NOTE: In order to use this feature over S/PDIF output, please make sure that you have a 96KHz capable decoder. Failure in providing a 96KHz capable decoder with this feature enabled may result in no sound or garbled playback.

Listen To Analog Inputs

Enable this button to monitor the playback from the analog inputs (CD In, Line In, Mic In, and Aux In) during recording. Enabling this button will enable Front Speakers or Headphones button or All Available Speakers and Outputs with Effects (QMSS) button to be selected.

Front Speakers or Headphones

Enable this button to monitor the analog inputs over front speakers or headphones (stereo).

All Available Speakers and Outputs with Effects (QMSS)

Enable this button to monitor the analog inputs over the current speaker configuration. Enabling this button will also activate the 3D Effects function. Be aware that PSA2 HD effects are not applied to any recording made.

NOTE: Please check the Troubleshooting section if you are having problem with microphone feedback during the recording.

The Ultimate Edge™ Soundcard Users Guide 23