Philips Sound Solutions
3.3.3. Setup Tab
Located under the setup tab is a speaker configuration panel and other critical audio controls. This tab contains the controls to select and configure the speaker mode based on the type and number of speakers you have. The Ultimate Edge soundcard supports a wide range of speakers. From the list on the left side of the Setup tab, you can choose the desired output configuration. This sets up the nature of audio processing, spatial algorithms, and the number of outputs, to suit your preference. The following is a detailed explanation of each output mode and each control on this tab. See Figure 12.
Fader Slider
Volume Slider
Balance Slider
Figure 12
Speaker Test Utility
The Speaker Test Utility can be utilized to test the current speaker configuration for proper connection to the soundcard. Testing each speaker channel ensures each speaker is positioned and connected properly.
The test utility highlights each of the available output channels for testing. Click any active speaker to send the test sound to the corresponding speaker. Figure 13 shows that 5.1 speakers are selected on the setup tab.
Figure 13
The Ultimate Edge™ Soundcard Users Guide | 19 |
