Sennheiser Adjusting the headband of the headphones, Putting the RS 220 into operation, Rs

Putting the RS 220 into operation

16h

Charging the BA 200 rechargeable batteries inside the headphones

Charge the BA 200 rechargeable batteries for at least 16 hours prior to first time use. The operating time is up to 8 hours.

A H

￿Place the headphones on the charging contacts A of the transmitter. The rechargeable batteries are being charged. The Battery LED Hlights up red.

When the rechargeable batteries are fully charged, the Battery LED H goes off.

Always store the headphones on the headphone holder to ensure that they are fully charged when they are needed. The intelligent battery charging technology prevents over-charging.

Adjusting the headband of the headphones

For good sound quality and best possible comfort, the headband has to be adjusted to properly fit your head. To do so, adjust the headband 1 via its snap-in locking mechanism:

1￿ Wear the headphones so that the headband 1 runs over the top of

your head.

￿ Adjust the length of the headband so that

– your ears are completely inside the earpads,

– you feel even, gentle pressure around your ears,

– a snug fit of the headband 1 on the head is ensured.

RS 220 15