English |
Adjusting the receiver channel
First turn on the transmitter (see section “Where to place the transmitter”).
As soon as the receiver is turned on, it au- tomatically tunes itself to the first strong si- gnal found (normally the transmitter frequency). If, for some reason, the selec- ted channel is not the correct one (e.g. be- cause of interference or another nearby system), press the TUNE button at the rear of the receiver until you can hear the audio signal loud and clear. If
you decide to change the transmitter channel (see section "Changing the trans- mission channel”), the frequency search tuning must be
34 | SET 820 S |