Putting the bodypack transmitter into operation

Connecting the microphone cable/instrument cable

The audio input is designed for the connection of both condenser microphones and instruments (e.g. guitars). DC powering of the condenser microphones is via the audio input MIC/LINE  (3-pole special audio socket).

￿Use one of the recommended Sennheiser microphones or the CI 1-4 instrument cable (see “Accessories” on page 33).

￿Connect the 3-pin special audio connector  from the Sennheiser microphone or instrument cable to the socket MIC/LINE .







￿Lock the 3-pin special audio connector by screwing down the coupling ring .

￿Via the operating menu, adjust the sensitivity of the microphone/line input (see page 20).

9