Synchronizing the bodypack transmitter with a receiver
Synchronizing the bodypack transmitter with a receiver
When synchronizing the bodypack transmitter with a receiver, please observe the following:
Only use a transmitter and a receiver from the same frequency range (see the type plates on the transmitter and the receiver).
Make sure that the desired frequencies are listed in the enclosed frequency information sheet.
Make sure that the desired frequencies are approved and legal in your country and, if necessary, apply for an operating license.
Synchronizing the bodypack transmitter with the receiver – individual operation
Upon delivery, the bodypack transmitter and the receiver are synchronized with each other. If, however, you cannot establish a transmission link between bodypack transmitter and receiver, you have to synchronize the channels of the devices.
For information on automatic synchronization of the bodypack transmitter with the receiver (individual operation), refer to the instruction
manual of the receiver. This information is marked with the 
icon.
Alternatively, you can set the channel on the bodypack transmitter manually:
Make sure that you set the bodypack transmitter to the same frequency bank and the same channel as the receiver (see page 21).
If you still cannot establish a transmission link, read the chapter “If a problem occurs ...” on page 31.
28