| Adjusting settings via the operating menu | |
|
|
|
Input sensitivity |
|
|
is adjusted... | Effect/display |
|
... too high | Close talking distances, speakers with loud voices or |
|
| loud music passages cause overmodulation in the |
|
| transmission link. |
|
| The yellow AF PEAK LED lights up. |
|
| The audio level display “AF” shows full deflection |
|
| for the duration of the overmodulation. |
|
... correctly | The audio level display “AF” shows full deflection |
|
| only during the loudest passages. |
|
... too low | The transmission link is undermodulated. This results |
|
| in a signal with high background noise. |
|
|
|
|
The following figures are a guide to the best settings:
Transmission situation | Sensitivity setting |
Loud music/vocals | −30 to −21 dB |
Presentations | −21 to 0 dB |
Instrument input |
|
Electric guitars with single coil pickups | −30 to −24 dB |
Electric guitars with humbucker pickups | −45 to −30 dB |
Guitars with active electronics (active pickups, | −45 to −30 dB |
active EQs, piezo pickups) |
|
|
|
Selecting the frequency bank and the channel manually – “Frequency Preset”
Menu |
| Frequency Preset |
| Frequency Preset | ||||||
|
|
|
|
|
|
| B.Ch: 1. |
|
| |
| Frequency Preset |
|
| B.Ch: | 5 | .14 |
| 14 |
| |
| B.Ch: 5.14 |
|
| 792.525MHz |
| 818.850MHz | ||||
|
|
|
| |||||||
Call up “Frequency |
| Select the frequency |
| Select the channel; | ||||||
Preset” |
| bank and confirm |
| store the setting | ||||||
“Stored”
When you are in the “Frequency Preset” menu item, the RF signal is deactivated.
21