Adjusting settings via the operating menu
Activating/deactivating the automatic lock mode – “Auto Lock”
| Menu |
|
|
| Auto Lock |
|
| Auto Lock | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Auto Lock |
|
|
|
| Active |
|
|
|
|
| I n a c t i v e |
|
|
|
|
|
|
|
|
|
|
|
| |||
| A c t i v e |
|
|
|
|
|
|
|
|
|
|
|
|
Call up |
|
| Select the desired |
| Store the setting | ||||||||
“Auto Lock” |
|
| setting |
|
|
|
|
| |||||
“Stored”
The lock mode prevents that the bodypack transmitter is accidentally switched off or programed during operation. The lock mode icon 
on the current standard display indicates that the lock mode is activated.
Press the rocker button to select the desired setting.
For information on how to use the lock mode, refer to page 12.
The extended menu “Advanced Menu“
Setting the transmission frequencies and the frequency banks “U1” to “U6” – “Tune”
When you have selected one of the system banks and then select the “Tune” menu, the bodypack transmitter automatically switches to channel 1 of the frequency bank “U1”. In this case, “U1.1” briefly appears on the display panel.
Upon delivery, the channels of the frequency banks “U1” to “U6” are not assigned a transmission frequency.
When you are in the “Tune” menu item, the RF signal is deacti- vated.
Via the “Tune” menu item, you can:
1.set a transmission frequency to be stored in the current channel of the frequency bank (“U1” to “U6”)
2.or select a frequency bank (“U1” to “U6”) and a channel and assign this channel a transmission frequency.
It is vital to observe the notes on frequency selection on page 28.
23