Sennheiser SK 2000 Deactivating the lock mode temporarily

Using the bodypack transmitter

SET ￿ Press the SET button.

The transmission frequency is displayed but the bodypack transmitter does not transmit an RF signal. The transmission icon  is not displayed. When the pilot tone function is activated on both bodypack transmitter and receiver, “RF Mute” appears on the receiver’s display panel.

543.200MHz  **2000**

AF P MUTE

Use this function to save battery power or to prepare a bodypack transmitter for use during live operation without causing interference to existing transmission links.

To activate the RF signal:

ON/OFF

SET

￿Press the ON/OFF button.

“RF Mute Off” appears on the display panel.

￿Press the SET button.

The transmission icon  is displayed again.

To switch the bodypack transmitter off:

￿If necessary, deactivate the lock mode (see next chapter).

ON/OFF ￿ Keep the ON/OFF button  pressed until “OFF” appears on the display panel. The red ON LED  goes off and the display panel turns off.

When in the operating menu, pressing the ON/OFF button  will cancel your entry (ESC function) and return you to the current standard display.

Deactivating the lock mode temporarily

You can activate or deactivate the automatic lock mode via the “Auto Lock” menu item (see page 23). If the lock mode is activated, you have to temporarily deactivate it in order to be able to operate the bodypack transmitter:

SET ON/OFF ￿ Press the SET button or the ON/OFF button. “Locked” appears on the display panel.

￿ Press the rocker button.

“Unlock?” appears on the display panel.

12