
Putting the radio microphone into operation
After you have changed the power pack, the radio microphone continues operating on exactly the same settings as before the change. Stored settings are retained in memory on
Inserting batteries into the B
To open the battery box, push down the | ||
| display section of the battery box . | |
|
| |
| Insert the batteries. Observe correct | |
|
| polarity when inserting the batteries. |
Close the battery box.
LC display shown on the example of the B
•
• If the battery capacity is too low (LOW BATT), the last segment starts flashing and the batteries must be changed.
LOW BATT
Recharging the BA
Before using the BA
The L 50 charger (see “ Accessories” on page 30) can charge two BA
10