“LOCK” appears on the display panel.
 Slide the multi-function switch  to the position  (UP) or  (DOWN).
“UNLOCK” appears on the display panel.
 Press the multi-function switch  (switch position  SET).
You can now change the settings.
To achieve this, either press the ON/OFF button or the multi-function switch  (switch position  SET).

Using the radio microphone

Deactivating the autolock function temporarily

To be able to make changes to the settings via the operating menu, you must temporarily deactivate the lock mode.

 

UP

SET



DOWN

After you have exited the operating menu, the lock mode is automatically re-activated after 10 seconds. You can also immediately activate the lock mode by pressing the ON/OFF button briefly.

Identifying the radio microphone

The radio microphone comes with nine interchangeable color-coded identification markers, allowing you to clearly identify each radio microphone.

 To remove the identification marker, press the two snap-in pins together while sliding the identification marker out of the guide rails.

 Put on the new identification marker by sliding it onto the guide rails.

15