Sennheiser SKM 5200-II OFF, LOCK, panel , transmitting, Release the ON/OFF button, Using the radio microphone, AF several times on the display, After five seconds the “RF”  icon

Using the radio microphone

Doing a frequency check

The radio microphone has a frequency check mode that prevents that the radio microphone transmits on an unwanted frequency after switch-on.

 When switching on the device, keep the ON/OFF button depressed.

	The RF signal is deactivated. The current
	frequency is displayed on the LC display
	panel .

If the displayed frequency is the wanted frequency:

		Release the ON/OFF button .
RF
	￿	After five seconds the “RF”  icon
MHz
		appears and the radio microphone starts
		transmitting.

If you want to select another frequency, proceed as follows:  Release the ON/OFF button .

Within 5 seconds, change to the setting mode of the “CHAN” or “TUNE” menu.

Change the transmission frequency (see “Adjustment tips for the operating menu” on page 23).

The automatic lock mode (autolock function)

The radio microphone has a lock mode that prevents that the radio microphone is accidentally programmed while operating. When the autolock function is activated via the “LOCK” menu (see page 27) the lock mode is automatically activated 10 seconds after pressing the last button and remains activated.

Prior to this, the lock mode icon  flashesAF several times on the display.

CH dB MHz



You can deactivate the autolock function either permanently (see page 27) or temporarily (see page 15).

14