Adjustment tips for the operating menu

Adjusting the microphone sensitivity – “ATTEN”

Via the “ATTEN” menu, you can adjust the radio microphone’s sensitivity by changing its input attenuation.



RF AF

dB

The input attenuation is correctly adjusted when the level display for audio signal “AF” shows full deflection  only during the loudest passages. The input attenuation can be adjusted in 1-dB steps from –40 dB to 0 dB.

The bargraph has a resolution of approx. 3 dB per segment with a display range of 45 dB.

Adjusting the low-cut frequency – “LOWCUT”

To reduce unwanted low-frequency noise such as engine, wind and rumble noise, you can activate a low-cut filter. The low-cut frequency can be set to 190 Hz or 120 Hz.

If you do not want to reduce low-frequency signal portions, select the setting “FLAT”.

Selecting the standard display – “VIEW”

Via the “VIEW” menu, you can select one of the following standard displays:

RF

 

RF

 

RF

CH MHz

 

CH

 

 

TransmissionChannel “CHAN”Name “NAME”
frequency “FREQ

 

 

 

 

The selected standard display is shown•after switch-on,•after the menu settings have been displayed in display mode.

26