Make sure that the desired frequencies are listed in the enclosed frequency table and approved and legal in your country. If necessary, apply for an operating license.
For an overview of the frequencies and transmission powers, refer to the enclosed supplement “Legal requirements for the use of radiomicrophones”.

Adjustment tips for the operating menu

Adjustment tips for the operating menu

When setting frequencies on the radio microphone, please observe the following:



Selecting a channel – “CHAN”

Via the “CHAN” menu, you can switch between the channels in the channel banks “FIX” and “VAR“. The radio microphone is not transmitting while this adjustment is being made.

When changing to the setting mode of the “CHAN” menu, the current channel number appears on the display. After approx. 1 second, the currently assigned frequency is displayed.

1 sec.

CH

 

 

CH MHz

 

To select a different channel, slide the multi-function switch  to the position  (UP) or  (DOWN). The new channel number appears on

the display panel for approx. 1 second and then the currently assigned frequency is displayed.

Only after the new setting has been stored (“STORED” has appeared on the display panel) does the transmitter operate on the transmission frequency of the new channel.

Selecting the frequencies to be stored in the channel bank “VAR” – “TUNE”

Via the “TUNE” menu, you can freely select the frequencies to be stored in the channel bank “VAR” (variable bank). The radio microphone is not transmitting while this adjustment is being made.

23