Using the plug-on transmitter

Using the plug-on transmitter

To establish a transmission link, proceed as follows:

1.Switch the receiver on (see the instruction manual of the receiver).

2.Switch the plug-on transmitter on (see next section).

The transmission link is established and the diversity receiver’s RF level display “RF” reacts.

It is vital to observe the notes on frequency selection on page 26.

If you cannot establish a transmission link between plug-on transmitter and receiver, read the chapter “Synchronizing the plug-on transmitter with a receiver” on page 26.

Switching the plug-on transmitter on/off

￿

￿

To switch the plug-on transmitter on (online operation):

ON/OFF ￿ Press the ON/OFF button ￿.

The plug-on transmitter transmits an RF signal. The red ON LED ￿ lights up and the “Frequency/Name” standard displayappearsonthedisplaypanel.Thetransmission icon ￿ is displayed.

To switch the plug-on transmitter on and to deactivate the RF signal on switch-on(offline operation):

ON/OFF ￿ Keep the ON/OFF button ￿ pressed until “RF Mute On?” appears on the display panel.

10