Adjusting settings via the operating menu

Input sensitivity

 

adjusted...

Effect/display

 

 

... correctly

The audio level display “AF” ￿ shows full deflection

 

only during the loudest passages.

 

 

... too low

The transmission link is undermodulated. This

 

results in a signal with high background noise.

 

 

 

 

Adjust a low input sensitivity when using condensermicrophones, adjust a high input sensitivity when using dynamic microphones.

Selecting the frequency bank and the channel manually – “Frequency Preset”

Menu

 

Frequency Preset

 

Frequency Preset

 

Frequency Preset

 

 

B.Ch:

18

.26

 

B.Ch: 19.

26

 

 

B.Ch: 18.26

 

 

 

 

546.550MHz

 

 

538.475MHz

 

 

 

 

 

 

 

Call up “Frequency

 

Select the frequency

 

Select the channel;

Preset”

 

bank and confirm

 

store the setting

“Stored”

When you are in the “Frequency Preset” menu item, the RF signal is deactivated.

Overview of the frequency banks and channels:

Frequency bank

Channels

Type

 

 

 

“1” to “20”

up to 64 per

System bank:

 

frequency

frequencies are factory-preset

 

bank

 

 

 

 

“U1” to “U6”

up to 64 per

User bank:

 

frequency

frequencies are freely selectable

 

bank

 

 

 

 

 

 

 

When setting up multi-channel systems, please observe the following:

Only the factory-preset frequencies within one frequency bank (“1” to “20”) are intermodulation-free. It is vital to observe the notes on frequency selection on page 26.

20