Adjusting settings via the operating menu

The extended menu “Advanced Menu”

Setting the transmission frequencies for the frequency banks “U1” to “U6” – “Tune”

When you have selected one of the system banks and then select the “Tune” menu, the plug-on transmitter automatically switches to channel 1 of the frequency bank “U1”. In this case, “U1.1” briefly appears on the display panel.

Upon delivery, the channels of the frequency banks “U1” to “U6” are not assigned a transmission frequency.

When you are in the “Tune” menu item, the RF signal is deactivated.

Via the “Tune” menu item, you can:

1.set a transmission frequency to be stored in the current channel of the frequency bank (“U1” to “U6”)

2.orselectafrequencybank(“U1”to“U6”)andachannelandassignthis channel a transmission frequency.

It is vital to observe the notes on frequency selection on page 26.

Setting a transmission frequency for the current channel

￿ Press the UP/DOWN button until the “Tune” menu item appears.

SET ￿ Press the SET button.

The frequency selection appears.

 

Advanced Menu

 

 

 

Tune

 

 

Tune

 

Tune

 

 

 

 

543

.850 MHz

 

 

 

543.

850

MHz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B.Ch: U. 1

 

 

 

B.Ch: U. 1

Call up “Tune”

 

 

Select the MHz

 

Select the kHz

 

 

 

 

value and confirm

 

value; store the

 

 

 

 

 

 

 

 

 

 

setting

“Stored”

￿Set the desired frequency.

SET ￿ Press the SET button.

Your settings are stored. The “Tune” menu item appears.

22