Using the plug-on transmitter

￿Exit the operating menu.

￿Slide the MUTE switch ￿ to the left, to the position MUTE. The plug-on transmitter reacts as indicated in the table.

The current state of the muting function or the RF signal is displayed on the display panel of the plug-on transmitter:

 

 

543.850MHz

 

 

￿

 

 

 

 

 

 

**2000**

 

 

 

 

 

 

 

 

 

 

 

 

 

P

 

 

 

 

 

 

 

 

MUTE

 

 

 

 

AF

 

 

 

 

 

 

 

 

 

 

￿

 

 

 

 

 

 

 

 

 

 

 

 

 

State

Transmitter’s display panel

 

 

 

 

 

 

 

 

 

 

Audio signal is muted

“MUTE” ￿ is displayed

 

 

 

 

 

 

 

 

 

 

Audio signal is activated

“MUTE” ￿ is not displayed

(muting is canceled)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RF signal is deactivated

“MUTE” ￿ is displayed,

 

 

 

transmission icon ￿ is not displayed

 

 

 

 

 

 

 

 

 

 

RF signal is activated

 

“MUTE” ￿ is not displayed,

 

 

 

transmission icon ￿ is displayed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You can also deactivate the RF signal on switch-on. For more information, refer to the chapter “Switching the plug-on transmitter on/off” on page 10.

Using the ON/OFF button, you can also activate/deactivate the RF signal during operation. To do so, briefly press the ON/OFF button and proceed as described on page 10.

13