Using the plug-on transmitter

SET ￿ Press the SET button.

The transmission frequency is displayed but the plug-on transmitter does not transmit an RF signal. The transmission icon ￿ is not displayed.

543.850MHz ￿ **2000**

AF P MUTE

Use this function to save battery power or to prepare a plug-on transmitter for use during live operation without causing interference to existing transmission links.

To activate the RF signal:

ON/OFF

SET

￿Press the ON/OFF button.

“RF Mute Off?” appears on the display panel.

￿Press the SET button.

The transmission icon ￿ is displayed again.

To switch the plug-on transmitter off:

￿If necessary, deactivate the lock mode (see page 11).

ON/OFF ￿ Keep the ON/OFF button ￿ pressed until “OFF” appears on

the display panel.

The red ON LED ￿ goes off and the display panel turns off.

When in the operating menu, pressing the ON/OFF button ￿ will cancel your entry (ESC function) and return you to the current standard display.

Deactivating the lock mode temporarily

You can activate or deactivate the automatic lock mode via the “Auto Lock” menu item (see page 21). If the lock mode is activated, you have to temporarily deactivate it In order to be able to operate the plug-on transmitter:

ON/OFF SET

￿ Press the SET button or the ON/OFF button.

 

“Locked” appears on the display panel.

￿ Press the UP button.

“Unlock?” appears on the display panel.

11