SMC sierra monitor corporation Sentry Instruction Manual - Version 6
CONFIGURATION PROCEDURE
Page: 40
4.6.2.2 CHECK CALIB
PRESS ENTER T O:
CHECK CALIB
The present calibration parameters can be check by
successive presses of the ENTER key. These include the
gas type, full scale, concentration of calibration gas, the
number of days between calibrations and the status of
global calibrate.
4.6.2.3 CHECK MODULE
PRESS ENTER TO:
CHECK MODULE
Any module number can be selected and configuration
information for that module recalled. Select the module
number using ARROWS, then step through the
configuration information using the ENTER key.
NOTE
MEASUREMENT OVERRANGE - When Combustible
concentration exceeds the 99% LEL range of the
instrument, the controller displays "HI".
4.6.2.4 CHECK PRINTER
PRESS ENTER T O:
CHECK PRINTER
Press ENTER to review printer configuration.