Server Technology Global Security Modem atz, ati9, Enter, Enter, Enter, at%t19,0, Country Codes, Configuring the Country Code, To configure the country code:, To verify the configured country code:

Configuring the Country Code

The Sentry integrated Modem is compliant for use per Telecom Certification for the countries listed in the following table. The AT%T19,0, command is used to set the country code. The default value is 34.

NOTE: For countries not listed, please contact Server Technology Technical Support.

Country Codes (Approved as of February 2003)

Country	Code	Result Code
Argentina	34	52
Australia	1	1
Austria	34	52
Belgium	34	52
Brazil	34	52
Canada	34	52
Chile	34	52
China	34	52
Cyprus	34	52
Czech Republic	25	37
Denmark	34	52
Estonia	34	52
Finland	34	52
France	34	52
Germany	34	52
Greece	34	52
Hong Kong	30	48
Hungary	30	48
Iceland	34	52
India	30	48
Indonesia	30	48
Ireland	34	52
Israel	30	48
Italy	34	52

Country	Code	Result Code
Japan	10	16
Liechtenstein	34	52
Luxembourg	34	52
Malaysia	30	48
Mexico	34	52
Netherlands	34	52
New Zealand	9	9
Norway	34	52
Philippines	30	48
Poland	30	48
Portugal	34	52
Russia	34	52
Singapore	30	48
Slovak Republic	30	48
South Africa*	35	53
South Korea	34	52
Spain	34	52
Sweden	34	52
Switzerland	34	52
Taiwan	34	52
Thailand	34	52
Turkey	34	52
United Kingdom	34	52
United States	34	52

*Compliance requires use of an approved surge protection device in conjunction with modem.

To configure the country code:

After successfully logging into the modem, type at%t19,0, followed by the country code and press Enter. Type atz and press Enter to reset the modem with the new settings.

Example

The following command sets the modem for compliance in Singapore:

at%t19,0,30<Enter>

OK atz<Enter>

OK

To verify the configured country code:

Type ati9 and press Enter. The displayed Result Code should match the code listed in the previous table.

.

6 • Operations	Sentry Global Security Modem
	Installation and Operations Manual