Servis-Rhino 2160 manual Tractor Preparation, Assembly

ASSEMBLY

TRACTOR PREPARATION

1.Move left rear tire out so that it is 50 inches minimum from the outside of left rear tire to the center of trac- tor. Then move the right rear tire out so that it is 96 inches minimum between the outside of the left and right rear tires. Refer to your tractor’s Operator’s Manual for instructions on Rear Wheel Adjustment for your particular tire. Asm-B-0029.Install fluid ballast inn left rear tire as needed for stability. Check tractor manual for recommended procedure and limits.

Never operate the tractor with a loose wheel rim or disc. Always tighten nuts to the specified torque and at the recommended intervals.

3. Extend front wheels out so that it is 55" inches between the inside of the tires. Asm-B-0030.

2160 07/11 Assembly Section 3-3

© 2011 Alamo Group Inc.

ASSEMBLY