Servis-Rhino 2160 manual Operation, OPS-B- 0023H

OPERATION

BOOM ARM ASSEMBLY

•Inspect condition of each arm section weldment

•Ensure all pins are in place.

•Ensure all bolts and screws are properly installed.

•Check condition of bushings at boom pivot points.

•Ensure each hydraulic cylinder is installed and retained correctly. Ensure the proper size pins are used to retain the cylinders in place and are secured properly. OPS-B- 0022_I

Never attempt to lubricate, adjust, or remove material from the Implement while it is in

motion or while tractor engine is running. (SG-20)

Never Leave the mower unattended while the head is in the raised position. The mower could fall causing serious injury to anyone who might inadvertently be under the mower. (SBM-4)

HYDRAULIC LINE INSPECTION

•Check for hydraulic leaks along hoses, cylinders and fittings. IMPORTANT: DO NOT use your hands to check for oil leaks. Use a piece of heavy paper or cardboard to check for hydraulic oil leaks.

•Inspect the condition of the valve.

•Ensure fitting is properly connected.

•Inspect condition of nylon bushings.

OPS-B- 0023_H

2160 06/11 Operation Section 4-13

© 2011 Alamo Group Inc.

OPERATION