Manuals / Servis-Rhino / Lawn and Garden / Brush Cutter

Servis-Rhino 60/72 manual Assembly

Models: 60/72

1 132
Download 132 pages 60.03 Kb
Page 70
Image 70

ASSEMBLY

This Cutter will attach to most tractors with Cat. II & III and II & III Quick Hitch. The Lumberjack can be purchased for tractors with 540 or 1000 RPM PTO.

DEALER SET-UP INSTRUCTIONS

Assembly of this mower is the responsibility of the Servis-Rhino dealer. The mower should be delivered to the owner completely assembled, lubricated, and adjusted for normal cutting conditions.

Set up mower as received from the factory with these instructions. Open parts box and lay parts out to make location easy. Refer to the parts lists and exploded view drawings for more detail.

This mower is shipped partially assembled. Assembly will be easier if components are aligned and loosely assembled before tightening hardware.

CAUTION! Always use personal protection devices such as eye, ear and feet protectors during assembly.

A-FRAME ASSEMBLY (FIGURE 1) 72" MODEL

To assemble the Mower’s A-Frame, follow the procedures listed below:

1.One side at a time, position the mower’s left and right A-Frame halves (28 and 26) between the respective front set of mower deck lugs. Align A-frame hole with lug back hole and insert a 1” x 8” bolt (41). Install a 1” locknut (40) onto bolt (41), but do not tighten at this point. Repeat procedure on other A-frame half.

2.To connect the two A-frame halves (28 and 26), place bushing (27) between frame halves’ lower front holes and retain halves (28 and 26) and bushing (27) with a 1” x 4-1/2” bolt (42) and 1” locknut (43).

3.Insert spacer (23) between two front upper braces’ (19) farthest holes. NOTE: Front upper braces have 3 bolt holes and lower rear braces 2 bolt holes. Insert bushing (24) into braces (19) and spacer (23). Align braces (19), bushing (24), and spacers (23) between A-frame back holes and retain using a 3/4” x 4-1/2” bolt (34) and 3/4” locknut (35).

4.Attach upper front braces (19) to lower rear braces (22) by first inserting bushings (20) into each upper front brace (19) center hole. Then place lower rear braces (22) between upper front braces (19) and bushings and align holes. Note: There will be separation between the upper front braces and no separation between the lower rear braces when installed correctly. Retain sets of braces and bushings using 3/4” x 3” bolt (38) and 3/4” locknut (35).

5.Install bushing (21) between upper braces’ remaining open holes and insert 3/4” x 3” bolt (37) and 3/4” locknut (35).

6.Place spacer (25) into set of lower rear braces. Insert spacer (23) on each side of lower rear brace holes and place between mower deck rear lugs. Align brace holes and spacers with lug holes and insert a 3/4” x 4-1/2” bolt (34) and locknut 3/4” (35).

7.Tighten all bolts and locknuts per torque.

(FIGURE 1)

LJ60/72 02-02

Assembly Section 3-2

© 2004 Alamo Group Inc.

Page 69 Page 71
Page 70
Image 70
Servis-Rhino 60/72 manual Assembly
Page 69 Page 71

60/72 specifications

The Servis-Rhino 60/72 is a high-performance rotary mower designed to meet the demands of agricultural and landscape maintenance operations. With its robust construction and advanced features, this mower efficiently manages a variety of mowing tasks on different terrains.

One of the standout features of the Servis-Rhino 60/72 is its cutting width of 60 or 72 inches, allowing operators to cover large areas in less time while ensuring an even cut. The mower is equipped with a dual or triple blade system, ensuring that grass is cut cleanly and efficiently, resulting in a healthier lawn and improved aesthetic appeal.

The mower’s adjustable cutting height adds versatility, enabling users to select the desired grass length depending on the specific application or season. This feature allows for both high and low cuts, making it suitable for mowing thick grass in fields or maintaining lawns at a precise height.

In terms of technology, the Servis-Rhino 60/72 boasts a heavy-duty frame made from high-quality materials to withstand rigorous use. The construction is designed to absorb impacts and reduce wear, ensuring longevity and reliability in challenging environments. Additionally, the mower features a reinforced deck, preventing deformation and enhancing mowing performance even in rough conditions.

The mower's safety features include a quick-release safety latch that minimizes the risk of accidental engagement. It also includes a shielded design which protects the operator from debris and enhances operational safety.

The Servis-Rhino 60/72 is powered by either a tractor or an appropriate riding mower, offering flexibility in use. It is designed for easy attachment and detachment, allowing for seamless integration into existing equipment fleets. The mower can also be transported easily, thanks to its manageable weight and balanced design.

Maintenance of the Servis-Rhino 60/72 is straightforward, with easily accessible components for routine checks and repairs. This simplicity reduces downtime, ensuring that users can rely on their equipment for their mowing needs consistently.

In summary, the Servis-Rhino 60/72 combines robust construction, versatile performance, and advanced safety features, making it a top choice for agricultural professionals and landscape maintenance personnel alike. With its blend of technology and practical design, it offers a reliable solution for all mowing applications.