(SG-21)

OPERATION

OPERATION

Engagement Check Procedure

1.With the driveline attached, raise and lower the cutter within its operating range. Position the mower at the point where the telescoping driveline is at its maximum extension. Turn off the tractor and apply the parking brake. Securely block the cutter at this height.

2.Mark the inner shield 1/8” from the end of the outer shield.

3.Disconnect the driveline from the tractor and separate the two driveline halves.

4.Measure the distance from the mark to the end of the inner profile. This length is the amount the driveline profiles were engaged.

5.If the engaged length is less than 10”, the shaft is considered too short and should be replaced with a longer shaft. Consult an authorized dealer to purchase the required driveline length.

NOTE: When raising the cutter, at least 1” clearance must be maintained between the driveline and the cutter deck. If necessary, place an upper lift stop on the 3-point hitch control lever to limit the height the cutter can be raised.

8. PRE-OPERATION INSPECTION AND SERVICE

Before each use, a pre-operation inspection and service of the cutter and tractor must be performed. This includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped and functional, and performing needed repairs. Do not operate the cutter and tractor if the pre-operation inspection reveals any condition affecting safe operation. Perform repairs and replacement of damaged and missing parts as soon as noticed. By performing a thorough pre-operation inspection and service, valuable down time and repair cost can be

avoided.

DANGER! Always disconnect the main PTO Driveline from the Tractor before performing service on the Mower. Never work on the Mower with the Tractor PTO driveline connected and running. Blades or Drivelines could turn without warning and cause immediate

entanglement, injury or death. (SRM-3)

WARNING!

WARNING!

Never work under the Mower, the framework, or any lifted component unless the Mower is securely supported or blocked up to prevent sudden or inadvertent falling which could cause serious injury or

even death. (SG-14)

Periodically inspect all moving parts for wear and replace when neces- sary with authorized service parts. Look for loose fasteners, worn or broken parts, and leaking or loose fittings. Make sure all pins have cotter pins and washers. Serious injury may occur from not maintaining this Implement in good working order.

LJ60/72 02-02

Operation Section 4-14

© 2004 Alamo Group Inc.

Page 87 Page 89
Page 88
Image 88
Servis-Rhino 60/72 manual PRE-OPERATION Inspection and Service, Engagement Check Procedure
Page 87 Page 89

60/72 specifications

The Servis-Rhino 60/72 is a high-performance rotary mower designed to meet the demands of agricultural and landscape maintenance operations. With its robust construction and advanced features, this mower efficiently manages a variety of mowing tasks on different terrains.

One of the standout features of the Servis-Rhino 60/72 is its cutting width of 60 or 72 inches, allowing operators to cover large areas in less time while ensuring an even cut. The mower is equipped with a dual or triple blade system, ensuring that grass is cut cleanly and efficiently, resulting in a healthier lawn and improved aesthetic appeal.

The mower’s adjustable cutting height adds versatility, enabling users to select the desired grass length depending on the specific application or season. This feature allows for both high and low cuts, making it suitable for mowing thick grass in fields or maintaining lawns at a precise height.

In terms of technology, the Servis-Rhino 60/72 boasts a heavy-duty frame made from high-quality materials to withstand rigorous use. The construction is designed to absorb impacts and reduce wear, ensuring longevity and reliability in challenging environments. Additionally, the mower features a reinforced deck, preventing deformation and enhancing mowing performance even in rough conditions.

The mower's safety features include a quick-release safety latch that minimizes the risk of accidental engagement. It also includes a shielded design which protects the operator from debris and enhances operational safety.

The Servis-Rhino 60/72 is powered by either a tractor or an appropriate riding mower, offering flexibility in use. It is designed for easy attachment and detachment, allowing for seamless integration into existing equipment fleets. The mower can also be transported easily, thanks to its manageable weight and balanced design.

Maintenance of the Servis-Rhino 60/72 is straightforward, with easily accessible components for routine checks and repairs. This simplicity reduces downtime, ensuring that users can rely on their equipment for their mowing needs consistently.

In summary, the Servis-Rhino 60/72 combines robust construction, versatile performance, and advanced safety features, making it a top choice for agricultural professionals and landscape maintenance personnel alike. With its blend of technology and practical design, it offers a reliable solution for all mowing applications.
Top Page Image Contents