OPERATION

2.3 Tractor Horsepower

The power required to operate a cutter is determined by the tractor PTO horsepower. For most cutting conditions, the LJ60 and LJ72 require a tractor with 50 and 90 HP, respectively. Operating the cutter with a tractor that does not have adequate power may damage the tractor engine. Exceeding 125 HP may cause cutter damage by overpowering the unit in heavy cutting conditions.

OPERATION

2.4 3-Point Hitch

Lumberjack cutters are considerably heavier than conventional rotary mowers of the same size. The tractor 3-point hitch must be rated to lift at least 1650 lbs. if attaching a LJ60 and 2500 lbs. if attaching a LJ72.

The LJ60 attaches to tractors with a Cat II 3-point hitch and the LJ72 either a Cat II or III hitch. Refer to the tractor owner’s manual for the category of the tractor used. If the hitch does not conform to the ASAE Cat II or III hitch dimensions, the cutter may not fit properly. Consult an authorized dealer for possible modification procedures to mount nonconforming hitches.

Use the correct hitch pins for the hitch category being used. For a Cat II hitch, 1-1/8” lower and 1” upper diameter hitch pins are used and Cat III hitches require 1-7/16” lower and 1-1/4” upper diameter hitch pins.

Top link attaches here

1-1/4 O.D. Bushing must be installed here.

 

Hitch arms attach here

 

 

CAT II Implement / Hitch Specifications

 

Width from outside to outside A-frame

32-3/8"

Quick Hitch width inside lug to lug

33-5/8"

Height from bottom hitch pin to top pin

19"

Lower pin diameter

1-1/8"

Upper pin diameter

1"

Linch Pin diameter

15/32"

CAT III Implement / Hitch Specifications

 

Width from outside to outside A-frame

38"

Quick Hitch width inside lug to lug

39-1/4"

Height from bottom hitch pin to top pin

22"

Lower pin diameter

1-7/16"

Upper pin diameter

1-1/4”

Linch Pin diameter

15/32"

2.5 Front End Weight

A minimum of 20% total tractor weight must be maintained on the tractor front end when the cutter is in the raised position. Proper weight on the tractor front end is critical to maintain steering control and to prevent the tractor from rearing up while driving. If the tractor front end is too light, add weight until a minimum of 20% total weight is reached on the front tires. Front weights and weight carriers can be purchased through an authorized tractor dealership.

LJ60/72 02-02

Operation Section 4-6

© 2004 Alamo Group Inc.

Page 80
Image 80
Servis-Rhino 60/72 manual Tractor Horsepower, Point Hitch, Front End Weight

60/72 specifications

The Servis-Rhino 60/72 is a high-performance rotary mower designed to meet the demands of agricultural and landscape maintenance operations. With its robust construction and advanced features, this mower efficiently manages a variety of mowing tasks on different terrains.

One of the standout features of the Servis-Rhino 60/72 is its cutting width of 60 or 72 inches, allowing operators to cover large areas in less time while ensuring an even cut. The mower is equipped with a dual or triple blade system, ensuring that grass is cut cleanly and efficiently, resulting in a healthier lawn and improved aesthetic appeal.

The mower’s adjustable cutting height adds versatility, enabling users to select the desired grass length depending on the specific application or season. This feature allows for both high and low cuts, making it suitable for mowing thick grass in fields or maintaining lawns at a precise height.

In terms of technology, the Servis-Rhino 60/72 boasts a heavy-duty frame made from high-quality materials to withstand rigorous use. The construction is designed to absorb impacts and reduce wear, ensuring longevity and reliability in challenging environments. Additionally, the mower features a reinforced deck, preventing deformation and enhancing mowing performance even in rough conditions.

The mower's safety features include a quick-release safety latch that minimizes the risk of accidental engagement. It also includes a shielded design which protects the operator from debris and enhances operational safety.

The Servis-Rhino 60/72 is powered by either a tractor or an appropriate riding mower, offering flexibility in use. It is designed for easy attachment and detachment, allowing for seamless integration into existing equipment fleets. The mower can also be transported easily, thanks to its manageable weight and balanced design.

Maintenance of the Servis-Rhino 60/72 is straightforward, with easily accessible components for routine checks and repairs. This simplicity reduces downtime, ensuring that users can rely on their equipment for their mowing needs consistently.

In summary, the Servis-Rhino 60/72 combines robust construction, versatile performance, and advanced safety features, making it a top choice for agricultural professionals and landscape maintenance personnel alike. With its blend of technology and practical design, it offers a reliable solution for all mowing applications.