Operation

When you get to the end of a pass, slightly raise the cutter (2-4”) before turning. Never raise the cutter entirely while the blades are turning. If the cutter must be raised higher than 12” from ground level, disengage the tractor PTO and wait for all cutter rotation to come to a complete stop before proceeding to raise the cutter.

Large, dense, or wet vegetation may need to be cut in two or more passes to achieve a uniform cut. In such conditions, raise the cutting height to 12” or more on the first pass.

Then lower the cutting height of the cutter and cut the vegetation a second time. If possible, select a cutting pattern that is at a 90 degree angle to the first pass to reduce streaking and provide a more even cut.

LJ60/72 02-02

Operation Section 4-26

Servis-Rhino 60/72 manual Operation

Models: 60/72

OPERATION