OPERATION
Disc Mower PRE-OPERATION Inspection
Tractor ID#____________
Make_________________
Date__________________
Shift_________________

Before conducting the inspection, make sure th e tractor engine is off, all

rotation has stopped and the tractor is in park with the parking brake

engaged. Make sure t he mower is resting on the ground or securely

blocked up and all hydraulic pressure has been relieved.
OPERATION
Item Condition at Start of Shift Specific comment if not O.K.
The flashing lights function properly
The SMV Sign is clean and visible
The tires are in good condition with proper pressure
The wheel lug bolts are tight
The tractor brakes are in good condition
The steering linkage is in good condition
There are no visible oil leaks
The hydraulic controls function properly
The ROPS or ROBS Cab is in good condition
The seatbelt is in place and in good condition
The 3-point hitch is in good condition
The drawbar pins are securely in place
The PTO master shield is in place
The engine oil level is full
The brake fluid level is full
The power steering fluid level is full
The fuel level is adequate
The engine coolant fluid level is full
The radiator is free of debris
The air filter is in good condition
Operator’s Signature:_________________________________________________ DO NOT OPERATE an UNSAFE TRACTOR or MOWER
AGM 52-62-72-82 10/10
Operation Section 4-27
© 2010 Alamo Group Inc.