MAINTENANCE
Drive belts must be properly tensioned at all times to avoid excessive flopping and slipping.
New belts
If belts are new check tightness of the belt at least after 2 hours of work.
Used belts
If belts have been used for more than 24 hours, check belts wear and if necessary retighten them.
Belts adjustment
In order to tension or maintain belts tension loosen the nut (A) and tighten the nut (B).
MAINTENANCE
AGM 52-62-72-82
10/10
Maintenance Section 5-6
© 2010 Alamo Group Inc.