OPERATION

Troubleshooting Guide

Problem

Possible Cause

Remedy

 

 

 

 

 

The disk carrier bar vibrates too

1.

The nylon bushings of the joints in

1.

Replace the bushings.

much during work

question are overworn or completely

 

 

 

worn out.

 

 

.

2.

The pins and/or respective

2.

Replace the worn-out parts and

 

bushings/bearings of the joints in

lubricate regularly.

 

question are overworn.

 

 

 

3.

The outer conveyor is too slack

3.

Check that it is fastened correctly

 

 

 

and check the nylon bushings

 

 

 

 

The disk carrier bar does not adapt

1.

The height of the tractor coupling

1. Readjust as specified in operations

correctly to uneven ground.

plate is not adjusted correctly.

section (in particular check that both

 

 

 

ball-and-socket joints are the same

 

 

 

height above ground.

 

2.

The machine joints resist free

2.

Clean and lubricate the parts in

 

rotation.

question.

 

 

 

 

 

The disk carrier bar is not raised

1.

The entire machine is leaning one

1.

Check that both hoist ball-and

parallel to the ground

side.

socket joints are at the same height

 

 

 

above ground; the transverse slant of

 

 

 

chain is not adjusted, correctly the

 

 

 

chain to the correct length and fasten

 

 

 

one of the circlips into slot.

 

 

 

 

Earth accumulates between two

1. The ground is exceptionally wet; the

1.

Use the tractor hoist to raise the

sliding blocks in the front part of the

bar presses to hard on the ground.

machine higher above the ground

disk carrier bar

 

 

and then readjust the chain giving

 

 

 

minimum height above ground.

 

2.

The disk carrier bar tilts too far

2.

Adjust the tilt of axle by moving

 

forward.

turnbuckle on the third point.

 

 

 

 

 

Safety device often unhooks under

1.

The spring is not adjusted correctly.

1.

Check the condition of the spring

impact.

 

 

and if necessary, tighten the relevant

 

 

 

screw very carefully (danger of

 

 

 

unhooking when it receives blows

 

 

 

that are too strong for the machine

 

 

 

structure) until hooking occurs at

 

 

 

reasonable intervals only.

 

 

 

 

 

The stubble is too high or too

1.

The disk carrier bar does not tilt.

1.

Use turnbuckle to adjust the tilt.

sparse.

correctly.

 

 

AGM 52-62-72-82

10/10

Operation Section 4-45

© 2010 Alamo Group Inc.

OPERATION

Page 154 Page 156
Page 155
Image 155
Servis-Rhino AGM52, AGM62, AGM72 manual Troubleshooting Guide, Problem Possible Cause Remedy
Page 154 Page 156

AGM62, AGM72, AGM52 specifications

Servis-Rhino is renowned for manufacturing high-quality agricultural equipment, and among its impressive lineup, the AGM series stands out: AGM52, AGM72, and AGM62. These models are designed to enhance productivity, efficiency, and user-friendliness for farmers and agricultural professionals.

The AGM52 model exemplifies versatility and durability. It features a robust construction designed to withstand the rigors of agricultural work. With a working width of 5.2 meters, this model is ideal for small to medium farms, providing efficient coverage in less time. Its advanced hydraulic system ensures optimal control over the working depth, allowing operators to customize their settings based on soil conditions. The AGM52 is equipped with high-quality tines that ensure even soil incorporation, promoting better seedbed preparation.

Next in the lineup is the AGM62, which combines increased capacity with advanced technology. With a working width of 6.2 meters, it caters to larger farming operations seeking efficiency in tillage. One of the standout features of the AGM62 is its innovative leveling system, which utilizes a series of adjustable blades to create a perfectly level seedbed. This model is also compatible with precision farming technologies, allowing for data collection and analysis to optimize planting schedules and fertilizer application. Farmers will appreciate the ease of maintenance provided by the AGM62, as its design minimizes downtime and simplifies service tasks.

Finally, the AGM72 is the flagship of the series, boasting a working width of 7.2 meters, making it suitable for larger agricultural enterprises. This model incorporates cutting-edge precision engineering, ensuring durability and high performance. The AGM72 features a unique folding design that promotes transportability, allowing for easy movement between job sites. Its precision technology aids in accurate depth control, enabling consistent tillage and soil management. The AGM72 also supports various attachments, enhancing its functionality for diverse agricultural tasks.

All AGM models come with user-friendly controls and ergonomic designs that minimize operator fatigue. The combination of innovative technologies, robust construction, and practical features makes the Servis-Rhino AGM series an invaluable asset for modern farmers, contributing to sustainable practices and improved yields across various agricultural operations. Whether it's for small farms or large enterprises, the AGM52, AGM62, and AGM72 are exemplars of reliability and performance in the agricultural machinery sector.
Top Page Image Contents