PARTS ORDERING GUIDE
The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section.
1.The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required.
2.The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts are ordered.
3.The Purchase Order must clearly list the quantity of each part, the complete and correct part number (be sure to include all periods), and the basic name of the part.
4.The Manufacturer reserves the right to substitute parts where applicable.
5.Some parts are unlisted items which are special production items not normally stocked and are subject to special handling. Request a quotation for such parts before sending a Purchase Order.
6.The Manufacturer reserves the right to change prices without prior notice.
NOTE: | Please refer to The Safety Section in the front of this Manual for the proper |
| Part Number when ordering Replacement Safety Decals. |
| For maximum safety and to guarantee optimum product reliability, always use |
| genuine |
| premature or catastrophic failure which could result in serious injury or death. |
| Direct any questions regarding parts to: |
RHINO®
1020 S. Sangamon Ave.
Gibson City, IL 60936
Email:
©2006 Alamo Group Inc. | Parts Section – 2 |
